Full foam strip-out
We remove all accessible spray foam from rafters, trusses, roof deck and loft floor, using saws, multi-tools and dry ice blasting where the bond is hard. Foam is bagged on site and removed the same day.
Every 24/7 spray foam removal job in Wickford follows the same core scope, whether it is a 2am call-out or a planned weekday booking. Here is what is covered as standard, and what we quote separately if your property needs it.
We remove all accessible spray foam from rafters, trusses, roof deck and loft floor, using saws, multi-tools and dry ice blasting where the bond is hard. Foam is bagged on site and removed the same day.
Sealed loft hatch, negative air machine and vacuum-at-blade cutting are included as standard. We lay dust sheets on the landing and stairs and wipe down surfaces before we leave.
After stripping we take moisture readings at several points along the rafters and note them on your record. Readings above 20 percent mean ventilation work is needed, which we will flag before we finish.
You get dated photographs of every cleared rafter bay plus a written removal record. This is the document surveyors and mortgage lenders ask for, and we issue it the same day as the job.
All foam, dust and debris leave with us and go through licensed waste routes. You do not need to hire a skip or arrange disposal yourself, and there is no separate charge for it.
Night, weekend and bank holiday slots are included in the service, not sold as a premium. If your deadline is tight, we will book the earliest slot that works around your access and your family.
24/7 Spray Foam Removal in Wickford is the out-of-hours removal of spray foam insulation from lofts, roof rafters, cavity walls and attic spaces, carried out by trained operatives using saws, multi-tools, industrial vacuums and negative air machines. We cut the foam back in sections, bag it, and clean the timber so a mortgage lender or building surveyor can inspect the roof structure without obstruction. Most loft jobs take one to two days, and we work nights and weekends when a deadline is tight.
Wickford has a lot of 1960s and 1970s pitched-roof housing where spray foam was pumped into the loft or between rafters years ago. When that foam is closed cell polyurethane it seals the roof, traps condensation and starts the rot that surveyors flag as spray foam causing roof rot. We get calls from homeowners in Shotgate and Runwell who have had a mortgage refusal due to spray foam and need it out before a sale completes. Call us on 0333 567 2543 and we can be on site the same day.
From the first phone call to the final sweep, here is the sequence we follow on every 24/7 spray foam removal job in Wickford. You will know what is happening and when.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Spray foam removal saw
Cuts cured foam into blocks that can be bagged and carried out through a standard loft hatch. Used on open cell and softer closed cell foam where the bond to timber is light.
Oscillating multi-tool
Gets into the gaps between rafters and trusses where a saw will not reach. Lets us cut foam away from the timber face without gouging the grain.
Dry ice blasting machine
Fires dry ice pellets at the foam, freezing it so it flakes off fragile rafters and old felt. Our go-to method where the timber is soft or the bond is unusually hard.
Industrial vacuum
Runs at the blade throughout the job, capturing fine polyurethane dust before it reaches the rest of the house. Essential on occupied properties.
Negative air machine
Keeps the loft under negative pressure so dust and airborne particles stay inside the work zone. Paired with a sealed hatch on every job.
Respirator and protective clothing
Worn by every operative for the full shift. Cured foam dust and isocyanate residue are not something to breathe, and we treat them accordingly.
Sand blasting equipment
Used selectively on masonry and concrete surfaces where foam residue cannot be cut or frozen off. Always run with containment to control the abrasive media.
Sectional cut-and-bag
Foam is cut into manageable blocks from the ridge down, then bagged and carried out. This is the standard method for open cell foam in Wickford lofts and keeps the job clean and predictable.
Dry ice blasting
Dry ice pellets freeze the foam until it releases from the timber. We use it on older rafters, fragile felt and any surface where a blade would cause damage. No abrasive media is left behind.
Negative pressure containment
The loft is sealed and held under negative pressure while we work, so dust travels towards the vacuum rather than into the house. This is why we can strip foam from occupied family homes.
Moisture mapping
We take readings at multiple points along the rafters before and after removal. The readings go on your record and tell you whether ventilation work is needed to stop the rot returning.
01
What we do: We book a weekend or overnight slot, strip the foam, clean the rafters and issue the removal record before the valuation. The surveyor arrives to a clear roof space and a documented job.
→ The valuation proceeds without a re-inspection, and the lender's condition is satisfied in one visit.
02
What we do: We work overnight so the outgoing tenant is not disturbed, seal the hatch, run the negative air machine and clear the loft in a single shift.
→ The loft is clean and photographed by Friday morning, and the new tenancy paperwork is not held up.
03
What we do: We survey the loft, identify the foam type, take moisture readings and remove the foam in the affected bays first, then the rest of the roof space.
→ The source of the damp is removed, the timber is checked, and you get a clear plan for ventilation before the ceiling is redecorated.
04
What we do: We phase the removal over two or three overnight shifts, isolating one bay at a time and keeping the rest of the building operational.
→ The roof deck is cleared without a single day of lost trading, and the landlord gets a documented removal record for the insurer.
Wickford's housing stock is mostly 1960s and 1970s pitched-roof semis and terraces, and a lot of them had spray foam pumped into the loft during the insulation grant schemes of the 2000s and 2010s. Closed cell polyurethane was the usual product, and on these roofs it seals the loft so tightly that condensation has nowhere to go. By the time a surveyor sees it, the foam is often causing roof rot in the rafters and the lender has already refused the mortgage. Our round the clock spray foam removal Wickford Essex service is built around that reality: we work to valuation deadlines, strip the foam in a single shift where we can, and document the timber so the sale can move. In autumn and winter, when damp readings climb, we get a spike in calls from Hullbridge and South Woodham Ferrers. If you are looking for 24 hour spray foam removal in Shotgate Essex, we cover it on the same rota as the town centre, with overnight slots available seven days a week.
Wickford Town Centre
Terraced housing with tight loft hatches and limited parking. We plan access before the crew arrives and often work overnight to avoid blocking the street.
Shotgate
A high concentration of 1960s semis with closed cell foam in the loft. Most jobs here are mortgage-driven and need documentation within 48 hours.
Hullbridge
Riverside properties where damp readings run higher through autumn and winter. We check rafters carefully and flag ventilation work where needed.
South Woodham Ferrers
Larger detached homes with bigger roof spaces. Removal takes longer, but the same dust controls and paperwork apply.
Runwell
A mix of older cottages and newer builds. Foam types vary, so we survey first and match the removal method to the material.
Autumn and winter damp raising timber moisture
Readings above 20 percent are common from October through February. We take extra readings and advise on ventilation before the roof space is closed up again.
1960s and 1970s roof construction
Rafters in these roofs are often softer than modern timber, so we favour dry ice blasting over saws to avoid damaging the wood during removal.
Tight loft hatches in terraced streets
Foam has to be cut smaller to fit through the hatch. This adds time to the job, which is why we quote from photos before we start.
Mortgage deadlines driving the schedule
Most Wickford jobs are tied to a valuation or completion date. We prioritise these and can work overnight to hit a deadline.
Spray foam causes a narrow set of expensive problems, and they nearly always surface at the worst moment. Here are the ones we are called out for most often across Wickford and the surrounding Essex villages.
Problem
The sale stalls, the chain wobbles, and you are stuck paying for a survey that flagged a problem you cannot fix overnight. Lenders will not lend until the foam is gone and the timbers are verified.
Our Fix
We prioritise mortgage-driven jobs, work to your valuation deadline and supply dated photos plus moisture readings your surveyor can accept. Most standard lofts are stripped and documented within one to two days of the call.
Problem
Closed cell foam seals the roof, traps condensation and holds moisture against the timber. Left alone, rafters soften, felt perishes and the repair bill climbs into thousands.
Our Fix
We cut the foam back, dry ice blast the bonded sections and check moisture along every rafter. Where readings are high we flag the ventilation work needed and can advise on the fix before the rot spreads further.
Problem
Cavity foam stops surveyors carrying out a proper inspection and can hide damp bridging the wall. Buyers walk away and lenders add conditions that are hard to clear.
Our Fix
We survey the walls first, then remove the foam in sections with containment, keeping dust out of the living space. The wall is left clear for inspection, and we document what was removed and from where.
Problem
Foam sprayed directly onto rafters stops the timber breathing. Damp builds through autumn and winter, and by spring you have staining on ceilings and a surveyor's report you did not want.
Our Fix
Our team strips the foam, cleans the timber and takes moisture readings at multiple points. We photograph each bay and give you a clear picture of the roof's condition, so you can plan any follow-on work with confidence.
Spray foam removal is not a job to rush with a handsaw and a bin bag. Here is what you get when you book our team for an out-of-hours slot in Wickford and the surrounding Essex villages.
Out-of-hours call-outs
We run 24 hour spray foam removal Wickford wide, so a survey booked for Monday morning does not mean a weekend of panic. Our night crew can strip a standard loft of open cell foam in four to six hours and have the space swept and bagged before you leave for work.
Mortgage-ready paperwork
Lenders want proof the foam is gone and the timbers are sound. After every job we photograph the cleared rafters, note the moisture readings and hand you a removal record you can pass to your surveyor. That single sheet has unblocked more than a few Wickford sales.
Dust-controlled removal
Cutting cured polyurethane throws fine dust that gets into every corner of a house. We seal the loft hatch, run a negative air machine and use an industrial vacuum at the blade, so the landing and bedrooms stay clean. Respirators and protective clothing are worn for the full shift.
Timber-safe methods
We use an oscillating multi-tool and a spray foam removal saw to cut foam away from rafters and trusses without gouging the timber. Where foam is bonded hard, we switch to dry ice blasting, which freezes the foam so it flakes off the wood instead of tearing the grain.
Google ★★★★★4.9
Rang at 10pm about a mortgage refusal and someone answered straight away. Crew arrived the next morning, stripped the closed cell foam from the whole loft and had photos and readings to me by 5pm. Sale completed the following week. Cannot fault them.
Google ★★★★★4.8
They worked overnight in our terrace so the kids were not disturbed. Sealed the hatch, ran a vacuum the whole time, and the landing was spotless when we got up. Fixed price from photos, no extras on the invoice.
Checkatrade ★★★★★4.9
Surveyor flagged spray foam causing roof rot and I had no idea what to do. They explained the difference between open cell and closed cell, used dry ice blasting on the fragile rafters and left a full removal record. Two days, no mess.
Google ★★★★★5.0
Commercial job near Battlesbridge, three overnight shifts so we never closed. Phased it bay by bay, kept the dust contained and gave the insurer everything they asked for. Professional from the first call to the last sweep.
Spray Foam Removal Wickford has been trading since 2022, and in that time we have stripped foam from lofts, rafters, cavity walls and commercial units across Essex. Our operatives hold BPCA and CHAS accreditation, and we work to SafeContractor and Constructionline standards on every site. We have handled open cell, closed cell and mixed foam jobs for homeowners, landlords, surveyors and mortgage lenders. The team trains on new removal methods each year, including dry ice blasting and low-dust cutting, because foam formulations from BASF, Dow, Huntsman, Lapolla and Demilec all behave differently under the blade.
Real answers to the questions we hear most often from local homeowners and property managers.
If you are searching for spray foam removal near me Wickford, our local crews cover the town and every surrounding village. We can usually survey within 24 hours and book removal around your schedule, including nights and weekends.
View Spray Foam Removal near meSame-day slots are available when a surveyor or lender needs foam gone quickly. Ring before midday and we can often have a crew on site the same afternoon, stripping open cell foam from a standard loft in four to six hours.
View same day Spray Foam RemovalMost of our Wickford work is residential: lofts, rafters, attic spaces and cavity walls in occupied homes. We seal the work area, control dust and clear up fully, so you can stay in the house while we strip the foam.
View Residential Spray Foam RemovalWe strip spray foam from warehouses, workshops and commercial units across Essex, often out of hours so trading is not disrupted. Larger spaces are surveyed first, then scheduled in phases with the same dust controls we use domestically.
View Commercial Spray Foam RemovalLoft spray foam removal is our most common job in Wickford. We cut out open cell and closed cell foam from between and under rafters, clean the timber and leave the loft ready for a surveyor or for new insulation.
View loft spray foam removalFoam sprayed directly onto the underside of roof tiles or felt traps moisture and accelerates rot. We remove it carefully, check the roof structure and advise on ventilation so the same problem does not return.
View roof spray foam removalCall us on 03335672543 or email info@sprayfoamremovalwickford.com and we will get back to you the same working day. We cover Wickford and the surrounding Essex villages, and our phone line is open 24/7 for urgent jobs. Free assessments are usually booked within 48 hours.
Phone
03335672543Address
6 Station Approach, Wickford SS11 7AT, United Kingdom, Wickford, Essex
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available